Maleic anhydride grafted polypropylene used as an adhesive or a tie layer in applications where mechanical and adhesive performances at high temperatures are required.
Bonds to polypropylene, EVOH, PA.
Can be used as an adhesive in 3 layers polypropylene coatings (epoxy primer / adhesive / polypropylene) for external protection of steel pipe.
OREVAC® 18732 is not corrosive and is readily processed with standard polyolefin equipment. Conditions typically used in extrusion of polypropylene resins are suitable. Typical extrusion temperature settings could be:
Zone 1 : 160-180°C
Zone 2 : 180-200°C
Zone 3 : 200-220°C
Zone 4 : 210-230°C
Exit : 215-230°C
Fittings-Channels : 220-230°C
Die : 220-240°C
Final profile and settings will depend on the line and the multi-layer structure being run.
Storage, Handling & Safety
OREVAC® 18732 should be stored in dry conditions protected from UV-light. Improper storage conditions may cause degradation and have consequences on physical properties of the product.
Safety data sheet as well as information on handling and storage of the OREVAC® 18732 is available upon request to your SK Functional Polymer representative.
Three years from the date of delivery, in unopened packaging. For any use above this limit, please refer to our technical services.